In short
- A complete test takes 20-30 minutes: certified shutter count, sensor check at f/16, hot pixel test with a 30-second exposure, autofocus, every button, ports, and a 5-minute video.
- The shutter count must be read from a file shot in front of you. A JPG sent via chat by the seller could come from a different camera body.
- Dust on the sensor can be removed with a cleaning service costing 40-60 euros. Replacing a shutter costs 150-350 euros. These are not defects of the same weight.
- From a private seller, you have neither withdrawal rights nor warranty. From an online store, you have a 14-day withdrawal period and the legal warranty; at ReflexMania, used gear comes with a 2-year warranty.
At the counter, I often see the same scene: a customer arrives with a camera bought from a private seller just a week prior, which looked perfect in the listing photos, and we discover together a shutter count of 180,000 or a corroded mount. In most cases, ten minutes of testing at the time of delivery would have been enough to notice. The issue is not the seller's bad faith: often, they don't even know what they are selling.
This guide is the procedure we use in the lab, reduced to what you can do on your own with an SD card, a lens, and your phone. Let's go in order: what to ask before the appointment, what to look at on the outside, how to read the shutter count, how to test the sensor, autofocus, controls, and video. At the end, you'll find what to do when you can't test the camera in person, which is the most common case today.
Before the appointment: what to ask the seller
Half of the listings can be ruled out with a five-minute phone call. A seller with a healthy camera body is happy to answer specific questions. Someone with something to hide becomes vague, changes the subject, or rushes you. Before driving 40 kilometers to inspect a camera, ask these questions and note the answers.
The five questions that filter out the listings
- What is the shutter count, and how do you know? The number alone is not enough; it matters where it comes from. "Around 10,000" is not an answer. The seller must accept that you verify it on a file shot at the appointment. If they refuse, walk away.
- Do they send a photo of the serial number? The one printed under the camera body must match the one on the box, receipt, and warranty certificate. A mismatched serial number or a scratched label is the most serious red flag of all.
- Is there a receipt or invoice, and what was it used for? The purchase document proves provenance and date. The usage tells the rest: three years of summer trips and three seasons of weddings in the rain are very different lives.
- Has it ever been in service? A shutter replaced at an authorized center, with the receipt, is a plus. A problem is a repair done "by a friend," without documents.
- What is in the box? Original battery, charger, body cap, strap. Buying original battery and charger again can cost more than 100 euros, and that amount should be deducted from the price.
Tone is information too. "I have three other interested buyers, decide by tonight" is there to stop you from asking questions. If you want to understand the camera's value before even seeing it, you can find the criteria in our guide to evaluating a used camera.
What to put in your bag for the test
A test run on the seller's card is only worth half. You don't know what was previously on the card, and at home you won't have the files to review carefully on a monitor. Here's what to bring:
- An empty, formatted memory card, in the correct format. If the camera uses CFexpress or XQD, ask the seller beforehand if they have one: it is not guaranteed.
- Your own lens with the same mount, which you know well. With the seller's lens, you cannot determine if a focus defect depends on the body or the lens.
- A phone with an app to read EXIF data and a USB-C card reader. This allows you to read the file data on the spot, without relying on what the display shows.
- A small but powerful flashlight, to inspect inside the mount and in the battery and card compartments.
- A microfiber cloth, to clean the display and viewfinder before judging them.
One last thing to ask over the phone: the camera must arrive with a charged battery. If the battery is dead at the appointment, you lose half an hour of testing and often end up buying without having done them.
External inspection: what the body and mount reveal
A camera with shiny corners and worn paint on the grip can be perfectly healthy. Conversely, a nearly flawless camera with a damaged screw should raise a red flag. At the counter, we inspect structural details first and aesthetics second. This check takes 5 minutes and a flashlight, and often tells you whether it's worth proceeding with the other tests.
Wear from use vs. signs of drops
Wear from use is uniform and appears where the hands rest. Damage from a drop is localized and occurs where the camera hits the ground. The difference is visible as follows:
- Normal: worn paint on the top edges, shiny grip, small scratches on the top plate, strap marks near the eyelets.
- Suspicious: dents on a single edge, cracks in the body shell where the parts join, fine cracks around the mount.
- To investigate: screws with marked heads or a different color from the others. This indicates the camera body has been opened, either by a service center or by someone using the wrong screwdriver.
A case we often see is the grip rubber peeling off on one side. It is usually aged adhesive, it is easy to fix and not serious. It becomes a problem when you find the body deformed under the rubber: in that case, the rubber detached due to an impact, not age.
Mount, contacts and recesses
Concentric scratches on the mount are normal and are left by every lens change. Dents on the lugs and bent, recessed, or blackened electrical contacts are not normal. Mount your lens, attach it, and try rotating it slowly back and forth: there should be no play. If the lens moves or creaks, the mount has taken a hit or the screws have loosened.
On the Sony A7r, which we currently have for 700 euros, this test is more critical than on other models. It is the first generation of Sony's 36-megapixel full-frame cameras, still excellent for landscape and studio work, but Sony only reinforced the mount from the second generation onwards. If the camera has been used extensively with heavy lenses without support, you will immediately feel the play.
Then open the battery and card compartments. The latches must close with a firm click, and the sealing gaskets must be intact. Use a flashlight to look for green or white deposits on the battery contacts: these are oxidation, indicating moisture ingress or a battery that has leaked. Also, smell the camera. A musty or basement-like odor is a serious warning sign, as mold rarely stops at the body.
Viewfinder and display
Turn on the camera and frame a uniform white surface, then a black one. On the display, look for pixels that are always off or always on, halos, and darker areas at the edges. Also view the screen from an angle: if you see bubbles or a rainbow effect, the protective layer is peeling off. In the electronic viewfinder, fixed spots are often dust on the eyepiece and can be removed. However, if they remain when you adjust the diopter, they are inside the viewfinder.
On mirrorless cameras, the display is the only way to frame your shots, so it must be checked with even greater attention. An example is the Olympus PEN E-PL6 at 250 euros, a compact and lightweight Micro Four Thirds body that is an excellent first step into mirrorless photography. On these camera bodies, touch the screen in all four corners. If there is an area that does not respond to touch, the defect lies with the panel, not the settings.
Shutter count and shutter: the number that really matters
The shutter is the only mechanical component that wears out with every photo, and replacing it costs €150-350. That is why the shutter count is the first piece of data to verify. It must be read from a file you take on the spot, using your own memory card. A JPG sent via chat could come from a different camera body, or from before a motherboard replacement.
How to read the shutter count for each brand
Each brand records the data in a different location. The table summarizes the method we most often use at the counter.
| Brand | Where to find it | Tool |
|---|---|---|
| Nikon | In the file's EXIF data | EXIF app on phone or exiftool on computer |
| Canon | Rarely in EXIF, must be read from the camera body | Dedicated software with camera connected via USB |
| Sony | In the original file's internal data | exiftool on unmodified file, or software via USB |
| Fujifilm | Image count in file data, on many models | exiftool |
| Olympus, Panasonic | Hidden service menu | Key sequence, varies by model |
With mirrorless cameras featuring an electronic shutter, there is an additional distinction. Some models maintain two counters: one for mechanical shutter count and one total, which includes electronic ones. The mechanical count is what matters for wear. If the software displays only a single number, ask the seller which of the two it is.
How to interpret the number
There is no single threshold that applies to all cameras. A Canon EOS RP, currently priced between 570 and 600 euros, is one of the lightest RF full-frame bodies and is primarily purchased by enthusiasts: 15,000 shutter count is low. A Canon EOS R at 800 euros, with its 30 megapixels, often comes from wedding photographers. In that case, 80,000 shutter count must be evaluated together with the condition of the mount, dials, and sensor, not in isolation.
The shutter life ratings declared by manufacturers, ranging from 150,000 to 400,000 cycles depending on the tier, are statistical averages, not expiration dates. Some shutters fail at 40,000 shutter count, while others exceed twice the nominal value. The number tells you how much the camera has worked. The test below tells you how it got there.
The burst and fast shutter speed test
- Set the mechanical shutter explicitly, not the electronic one.
- Take a burst of 3-4 seconds. The sound must remain consistent from the first to the last shutter count, without pauses or irregular clicks.
- Photograph a light, uniform wall at the fastest shutter speed. It is 1/4000 on the EOS RP, 1/8000 on the EOS R and on the Sony A7 Mark II, which we offer at 570 euros with in-sensor stabilization.
- Zoom in on the photos: a dark band on an edge means a curtain is slowing down.
The signs of a tired shutter are always the same: black bands at fast shutter speeds, a burst that jams or slows down halfway through, or an error message appearing on the screen. Any one of these three is enough to factor in the cost of replacement and negotiate the price, or walk away.
The sensor: dust, hot pixels and stabilizer
On a sensor, dust is almost always the first flaw to appear and is also the least severe. The challenge lies in distinguishing it from a scratch or a defective pixel, which are far more costly. It takes just three shutter counts and ten minutes.
Dust and scratches: the f/16 test
- Set ISO 100, aperture priority, f/16 (or f/22 if the lens goes that far).
- Switch to manual focus and defocus completely: the subject must become a uniform surface.
- Frame a clear sky or a white wall and compensate by +1 stop.
- Zoom in to 100% on the display and scroll through the entire frame, including the corners.
Dust appears as gray, roundish spots, which are sharper at a closed aperture. If a spot reappears in the same spot after cleaning, inspect it more closely: it could be a drop of lubricant or a mark on the glass. With a mirrorless camera, you can also remove the lens and look directly at the filter in front of the sensor with a flashlight held flat against it. A scratch reflects light as a thin line. Dust can be removed with a 40-60 euro cleaning, whereas a scratch cannot be removed: the filter group must be replaced, and on many bodies this means replacing the sensor as well.
Hot pixels and dead pixels
Put the cap on, set 30 seconds at ISO 1600-3200 and disable long exposure noise reduction, as it would otherwise hide exactly what you are looking for. On the black file, look for red, green, or white dots.
- 5-10 hot pixels scattered: this is normal. Often the camera remaps them automatically, and some Olympus models have the Pixel Mapping function in the menu.
- Dozens of dots or dense clusters: the sensor is worn out or damaged, and it is not worth buying.
- Dead pixel: this is a fixed black dot, visible on the white test shot at f/16.
Also take a test shot with the lens cap on at the highest native ISO and look for horizontal banding or a magenta cast in a corner. These are defects that cleaning cannot fix.
In-body image stabilization
This test applies only to bodies with in-sensor stabilization. This feature is available on the Sony A7 Mark II, currently priced at 570 euros and the most affordable stabilized full-frame camera in our catalog, the Sony A7r Mark II at 760 euros with 42 megapixels, and the A7s II. It is not available on the first-generation A7r, the Sony A6100 (550 euros, excellent autofocus but no stabilization), the Canon EOS RP, or the EOS R.
With the camera off, gently shaking it, slight internal movement is normal: the sensor is free. When you turn it on, it must lock silently. A continuous hum, a vibration felt in the grip, or an error message at startup indicate a fault. Then perform the practical test: a 50mm lens at 1/10 second handheld, 5 shutter count with the stabilizer on and 5 with the stabilizer off. If the difference in sharpness is not visible, the stabilizer is not working.
Autofocus, dials and buttons: test everything, not just the shutter count
After a private sale, the most common issue we see is not the sensor. It’s a ring that slips, a button that doesn’t respond, or a display that turns off when you flip the camera. The seller takes one shot, the photo looks great, and nobody checks the rest.
The full range of controls
First, ask them to restore the camera to factory settings. Many users reassign button functions: a faulty button moved to a function never used goes unnoticed. After the reset, every button does what its label says, and you can verify it.
- Buttons: Press all of them, including those you would never use. They must respond to the first touch, without needing to press hard.
- Dials: Rotate them click by click in both directions. Each click must change only one value. If it skips a step or goes back, the internal contact is dirty or worn.
- Joystick: Move the AF point in all 8 directions, including diagonals, then press it in the center.
- Touch: Drag the AF point across the entire surface, including the corners. Dead zones are almost always located at the edges.
- Articulating display: Open it to its full range while looking at the image. If it flickers in one position, the flat cable in the hinge is damaged.
On dial-equipped cameras, this check carries more weight. A Fujifilm X-T3, currently available for 800 euros, features dedicated dials for shutter speed, ISO, and exposure compensation, along with a screen that tilts in three directions: there is a lot to test. The Fujifilm X-T30 II at 820 euros drops the directional pad and relies heavily on the joystick, which requires careful inspection. A Canon EOS R100, starting at 363 euros, has a fixed, non-touch screen: fewer moving parts, fewer weak points.
Autofocus in real-world conditions
Outdoors in daylight, any autofocus seems perfect. The real test is where the camera struggles.
- Single AF in low light: in a dimly lit room, focus on a low-contrast object. It must lock on without hunting back and forth for a long time.
- Continuous AF: have the seller walk towards you and take a burst. Check at 100% that the focus holds across the entire sequence, not just on the first frame.
- Eye recognition: frame a face at different distances and verify that the focus box finds the eye and tracks it.
DSLRs require an additional check: front and back focus. The AF module is separate from the sensor and, if it is misaligned, it will always focus slightly in front of or behind the subject. Take a shot at full aperture on an angled object and observe where the plane of sharpness falls. On mirrorless cameras, focus is measured directly on the sensor. If your photos always come out soft, the culprit is almost always the lens: this is why the camera body should be tested with a lens of your own, whose performance you are familiar with.
Video, ports, battery and card slots
Buyers who purchase for photography often skip the video test, which is a mistake. Recording puts the processor, sensor, and memory card under load simultaneously. A thermal defect or a loose connector won't show up in ten shutter counts: it emerges after a few minutes of continuous recording.
The 5-minute video test
Set the highest available resolution, usually 4K, and record for 5 minutes without stopping. Speak while recording, standing one meter away from the camera. Then review the file on a computer, not just on the display.
- Interruptions: the recording must run to the end on its own. If it stops with a fast card, the issue lies with the camera body.
- Temperature: if the overheating warning appears after 5 minutes in a room at 20 degrees, it is a warning sign.
- Audio: listen using headphones. Constant hissing, crackling, or a muted channel indicate a damaged internal microphone, often caused by humidity.
- Files: scrub the timeline looking for dropped frames or color blocks.
Camera bodies designed for video require more attention. We currently have a Sony A7s Mark II for 800 euros. Its 12-megapixel full frame remains a benchmark in low light, but many units have spent years on gimbals, connected to an external recorder. In that case, the shutter count tells you little: recording hours are what matter. Ask about its usage history and extend the test to 10-15 minutes. The same applies to the Canon EOS R50 V, currently priced at 540-550 euros: it is designed for content creators, so it is likely to have undergone long sessions powered on a tripod.
Ports, slots and battery
Only test the ports you will use, but test them thoroughly: you must connect a cable and verify that the function responds.
- Microphone: connect a 3.5 mm jack microphone and move the connector while recording. If the audio cuts out, the port is loose.
- HDMI: connect a monitor or television. The micro HDMI is the most fragile, and if the cable fits loosely, it has been forced.
- USB: verify that the computer recognizes the camera body and, if the model supports it, that the battery charges in the body.
- Card slots: take certified shutter count and record on every slot. On dual-slot camera bodies, it happens that one of the two no longer writes without the owner ever noticing, because they always used the other.
When checking the battery, look at its shape first. A swollen battery will barely fit into the compartment or won't sit flat on the table, and should be rejected. Cheap compatible batteries are the first to deform. Canon bodies with LP-E6 batteries display charging performance across three levels in the menu, and Nikon bodies with EN-EL15 batteries have a similar indicator in the Battery Info menu. Where the indicator is missing, battery life is what matters: the video test has already shown you how much the charge drops in 5 minutes. The A7s II uses the small NP-FW50 batteries, which have short life even when new, so you'll notice a tired battery immediately. A new original battery costs 40-80 euros: it's not a reason to give up on the camera, but it is a reason to negotiate the price.
When you can't test it: online and remote purchases
Today, almost all used equipment is purchased without physically handling the camera before payment. This is not a problem in itself. It becomes one when you rely on the same evidence you would accept in person, without being able to verify it. At a distance, the tests in this guide remain the same. What changes is who performs them and when you do them yourself.
What to expect from a private seller
From a private seller, you have neither a right of withdrawal nor a legal warranty. Once you have paid, the risk is yours. That is why inquiries must be made in advance and must be precise:
- Test video with visible date: a handwritten sheet with the current date, framed together with the camera, followed by power-on, burst mode, dials, and display in a single continuous take without cuts.
- Original RAW files, taken specifically on that day: one at f/16 on a light surface and one with a long exposure and lens cap mounted. RAW files are far less manipulated than JPGs processed by messaging apps.
- Photo of the serial number on the bottom plate, to be compared with the one written by Canon and Nikon in the EXIF data.
- Traceable payment with buyer protection: PayPal Goods and Services or credit card. Never "Friends and Family", never an instant bank transfer to a stranger.
If the seller refuses even one of these requests, walk away. A healthy camera has no reason to deny you a two-minute video. A 50 euro discount does not cover the cost of replacing a shutter.
How to make the most of your 14-day right of withdrawal
From an online store, you have a 14-day right of withdrawal from delivery and the legal warranty. However, the withdrawal only works if you use it promptly. Whoever opens the package, takes two shots of the cat, and discovers a hot pixel after three weeks has lost the right of withdrawal.
- Redo all the tests in this guide within the first week, preferably within 48 hours of delivery.
- Keep the packaging, caps, strap, cables, and documents until the deadline. Returning the item without accessories complicates the refund.
- Use the camera to test it, not for a wedding. The right of withdrawal covers verification, not wear and tear.
- If something is wrong, write to the seller immediately in writing, with photos or attached files.
Buying from a store also has a less obvious advantage: you can choose from multiple units. A Canon EOS R100 at our store today has 7 units available between 363 and 400 euros. These are compact bodies with a 24-megapixel APS-C sensor, excellent for getting started, and the price difference depends on the shutter count and condition declared in the listing. For a Olympus PEN E-PL6 at 250 euros, however, there is only one unit: you compare based on the data, not the photos. If this is your first camera and you still need to choose a system, start with the guide on how to choose your first used mirrorless.
What we do in our workshop
Every used camera that arrives at ReflexMania goes through our lab before being listed for sale. The protocol is the same one you read about in this guide. We show it to you to give you a benchmark, not to convince you to buy from us: if a private seller refuses these steps, you know what you are giving up on verifying.
- Certified shutter count reading: we read the counter via software on a file shot in the lab and report the number on the product sheet. It is not an estimate: it is the data for that specific unit.
- Sensor test: we check for dust at closed aperture, hot pixels with long exposure, banding and color casts at high ISOs. On cameras with in-sensor stabilization, we test that as well.
- Cleaning: sensor, viewfinder, mount and contacts. For us, dust is not a defect to report to the buyer. It is work to be done before sale.
- Test of every control: buttons, dials, joystick, touch, articulating display, card slots and ports, one by one.
- Video test: a continuous recording to verify overheating, audio and interruptions.
- Battery check: real battery life and, where the camera menu allows, the health status.
A concrete example. Today we have seven Canon EOS RP units ranging from 570 to 600 euros, and each one has its certified shutter count listed in the spec sheet. The price varies based on shutter count and condition, so compare the units before making a choice. For the Sony A7 Mark II, testing the stabilizer is a standard procedure. On the Fujifilm X-T3, a model chosen by many for video, long recording sessions are more critical than on other cameras.
We provide a 2-year warranty on all used equipment. That said, if a private seller offers you the same RP for 100 euros less, it is not necessarily a bad deal. Those 100 euros cover the laboratory work and the risk you would otherwise take on yourself. This guide is designed to bridge that gap: if you perform all the tests personally and the price is right, buying from a private seller makes sense.
The same applies in reverse. Sellers who know these tests sell better: they show up with the shutter count already read, RAW files ready, and no surprises to justify during the test. We discuss this in the guide on how to sell used photographic equipment.
Frequently Asked Questions
How many shutter counts are too many for a used camera?
There is no single threshold. It depends on the ratio to the camera's class and price: 50,000 shutter count on an entry-level body is high, whereas on a professional body it is a fraction of the stated lifespan. Evaluate the number together with the condition of the shutter, controls, and sensor.
Can I trust the shutter count stated in the listing?
Only if you verify it on a file shot in front of you or if it is certified by a laboratory. A screenshot or a JPG sent in chat may come from a different camera body.
Is dust on the sensor a reason not to buy?
No. It can be removed with a professional cleaning costing 40-60 euros, which can be used as a bargaining point. A scratch on the filter in front of the sensor is a different matter, as it requires replacing the component.
What do I do if I cannot inspect the camera in person?
From a private seller, request a test video with the date visible, the original RAW files, and a photo of the serial number, and pay using a traceable method. From an online store, you have a 14-day right of withdrawal: redo all the tests as soon as the package arrives.
Do I need to bring my own lens for the test?
Yes, if you can. With a lens you know, you can be sure that any focus or contact issues come from the camera body and not from the seller's optics.
How long does a proper test take?
Within 20 to 30 minutes, including the certified shutter count reading and a 5-minute video. A seller who allows you only five minutes is telling you something.
Found a used camera and want an opinion before buying it?
If you have any doubts about a purchase or need advice for your specific case, contact us. We offer free advice because we are photographers first and sellers second, and because a customer who makes a bad purchase won't come back to photography.
Three ways to reach us:
- Contact form — response within 24 business hours
- WhatsApp at 342 362 3454 (messages only)
- Phone: 071 291 6347 (Mon-Fri 9-13/15-18, Sat 9-13)
And if you want to see what we have in stock right away, explore the used cameras available today: every camera is certified, comes with a 2-year warranty, and ships within 24-48 hours.
Article written by Matteo for the ReflexMania Team. Last updated: October 2026. Prices and availability refer to the time of publication.
